Shenzhen ZhangQing Electronic Limited
Main products:power adapter,poe,pigtail
Products
Contact Us
  • Contact Person : Mr. Deng Jacky
  • Company Name : Shenzhen ZhangQing Electronic Limited
  • Tel : 86-755-27586027
  • Fax : 86-755-27757495
  • Address : Guangdong,Shen Zhen,6th Floor, Haoyunlai BLDG, XiXiang Town, BaoAn District, ShenZhen City, GuangDong Province, China
  • Country/Region : China
  • Zip : 518102

Passive PoE Injector & Splitter Set

Passive PoE Injector & Splitter Set
Product Detailed
Passive PoE Injector & Splitter Set Complete set for wide range of network products such as Access Points, Routers, etc. Passive PoE ?Power over Ethernet

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device). Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.Connector Barrel size is 2.1mm (5.5 x 2.1 mm)Power Pins 4,5 +  and 7,8 -

1. It is very simple to connect a passive PoE.  On the lower part, we connect the EthernetRJ connector of passive PoE to the PC, Hub or Switch and connect the power adapterto the power socket.2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connectthe power connectors and the Ethernet to the powered equipment. The equipment is nowconnected by them.

Passive PoE Injector & Splitter Set



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.